Standard Interpretations(Archived) - Standard Number

RSS Standard Interpretations Subscribe to our RSS Standard Interpretations feed.

• Publication Date
• Standard #

Standard Number > 1910 > 1910.23

• 1910.23 - Acceptability of a fixed ramp with a one-in-four slope on an industrial conveyor. - 07/06/2005
• 1910.23 - Additional fall protection requirements for concrete trucks when work platforms are equipped with guardrails and toeboards. - 12/16/2003
• 1910.23 - Alternative fall protection program when guardrails are infeasible to install. - 02/14/2006
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23 as it would apply to repair pits. - 08/09/1982
• 1910.23 - Clarification of 1910.23(c)(1). - 04/05/1978
• 1910.23 - Clarification of OSHA requirements pertaining to winding stairway systems. - 06/15/2010
• 1910.23 - Clarification of our railing requirements in 29 CFR 1910.23(e). - 09/16/1983
• 1910.23 - Compliance of stair and platform railings with height requirements in OSHA standards for fixed industrial stairs. - 08/27/2008
• 1910.23 - Conveyor Crossover Stile. - 04/22/1996
• 1910.23 - Fall protection for employees exposed to hazardous falls from roofs. - 08/13/1987
• 1910.23 - Fall Protection requirements in the Construction Standard. - 01/16/1997
• 1910.23 - General Industry Standard as it applies to the electric utility industry. - 12/18/1997
• 1910.23 - Guarding of Access Openings to Fixed Ladders. - 09/29/2009
• 1910.23 - Interpretation Regarding Guardrails Proposed for Coors Stadium. - 03/08/1995
• 1910.23 - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals. - 10/05/2004
• 1910.23 - Ladderway floor openings. - 05/12/1992
• 1910.23 - Loading docks. - 03/23/1976
• 1910.23 - Open roof hatches should be protected; grab bars not required at hatch exits. - 07/12/2000
• 1910.23 - OSHA's requirements for locking type snaphooks on pole strap systems - 03/13/1996
• 1910.23 - Platforms and ladders on communication towers. - 03/26/1993
• 1910.23 - Proposed Powered Platform installations. - 07/01/1981
• 1910.23 - Ramps: guarding and means of access to a higher elevation. - 02/28/1996
• 1910.23 - Safeguarding of floor holes between platforms and equipment. - 11/02/1984
• 1910.23 - Sectionalized rail systems. - 05/30/1979
• 1910.23 - Spacing requirements between two handrails. - 12/10/1996
• 1910.23 - The enforcement of 29 CFR 1910.23(a)(9), for floor openings and holes. - 07/30/1979
• 1910.23 - The positioning of the safety line on billboards. - 06/18/1980
• 1910.23 - The use of a safety chain in lieu of a gate. - 02/12/1982
• 1910.23 - Tip-up rigid guardrail system. - 02/04/1982
• 1910.23 - Toe clearances on ladders. - 11/12/1992
• 1910.23 - Toeboard requirements on walkways over interior of a water tank. - 03/31/1994
• 1910.23 - Use of toeboards to protect a floor hole and variations in riser heights for stairs. - 07/12/1996
• 1910.23(a)(1) - Guarding requirements for skylights. - 02/16/1984
• 1910.23(a)(2) - A swinging gate is required only at ladderway floor openings and platforms. - 06/12/1975
• 1910.23(a)(2) - Fall protection requirements when working from ladders in the telecommunications industry - 05/23/2005
• 1910.23(a)(2) - Guarding of Access Openings to Fixed Ladders. - 09/29/2009
• 1910.23(b) - Clarification of protection of wall openings and holes. - 09/08/1975
• 1910.23(c) - Alternative fall protection program when guardrails are infeasible to install. - 02/14/2006
• 1910.23(c) - Fall protection for an extendable gangway. - 07/24/1995
• 1910.23(c)(1) - A tie-off system is acceptable where a standard guardrails are not feasible - 05/13/1980
• 1910.23(c)(1) - Additional fall protection requirements for concrete trucks when work platforms are equipped with guardrails and toeboards. - 12/16/2003
• 1910.23(c)(1) - Fall protection requirements when working from ladders in the telecommunications industry - 05/23/2005
• 1910.23(c)(1) - Guardrail and toeboard requirements for antenna platforms. - 06/03/1983
• 1910.23(c)(1) - The acceptability of manhole entries through concentric cone or eccentric cone concrete pipe transition sections to underground workplaces. - 05/13/1986
• 1910.23(c)(2) - Whether additional handrails are required on the grated walkways provided on one side of the 13 belt conveyors. - 09/14/1990
• 1910.23(c)(3) - Fall protection requirements when working from ladders in the telecommunications industry - 05/23/2005
• 1910.23(c)(3) - Interpretation on requirements for guard rail height on ledges. - 11/29/1979
• 1910.23(c)(3) - Workers must be protected from hazards of heated (hot) surfaces. - 08/19/1998
• 1910.23(d) - Stairways for public use are not covered by OSHA. - 06/20/1974
• 1910.23(d)(1) - Clarification of OSHA requirements pertaining to winding stairway systems. - 06/15/2010
• 1910.23(e) - Compliance of stair and platform railings with height requirements in OSHA standards for fixed industrial stairs. - 08/27/2008
• 1910.23(e) - Handrail and railing specifications for general industry. - 04/22/1975
• 1910.23(e)(1) - Clarification of OSHA requirements pertaining to winding stairway systems. - 06/15/2010
• 1910.23(e)(1) - Conditions under which a stair railing can also serve as a handrail. - 09/14/2005
• 1910.23(e)(1) - Whether additional handrails are required on the grated walkways provided on one side of the 13 belt conveyors. - 09/14/1990
• 1910.23(e)(2) - Clarification of apparent discrepancy in height requirements for stair and hand railings. - 03/08/1999
• 1910.23(e)(2) - Clarification of OSHA requirements pertaining to winding stairway systems. - 06/15/2010
• 1910.23(e)(2) - Conditions under which a stair railing can also serve as a handrail. - 09/14/2005
• 1910.23(e)(2) - Stair rail height must be between 30-34 inches. - 11/09/1999
• 1910.23(e)(3) - Requirements for Guardrail systems - 06/21/2013
• 1910.23(e)(3)(ii) - The diameter of standard pipe railings. - 01/21/1976
• 1910.23(e)(3)(iv) - Clarification of the 200 pounds strength requirement for railings. - 12/03/1975

NOTICE: This is an OSHA Archive Document, and no longer represents OSHA Policy. It is presented here as historical content, for research and review purposes only. Return to current Interpretations.